1.All kinds of biomass waste, such as sawdust, Coconut shells, olive shells, palm shells, bamboo,etc.
2.Civil sludge, municipal sludge, industrial sludge,etc
Hourly Feeding Capacity: 500KG-3000KG
Working Method: Continuous
Wood Charcoal Making Machine (also called carbonization furnace, biomass carbonization machine) is a continuous environmental carbonization equipment. The wood carbonization machine can carbonize the bark, wood chips, bamboo chips, sawdust, branches and other wastes of trees. After carbonization, it is milled to produce high quality carbon products.
Carbonization Orocess of Wood
Crushing & Drying – Materials with a moisture content greater than 15% and a size greater than 20 mm need to be first crushed and dried in a dryer;
Carbonization & Discharge – preheating the carbonization main furnace, and then the dried material is transported to the feeder by the conveyor belt and then into the carbonization main furnace for carbonization; in the case of coconut shell, it can be cooled by water after 18-20 minutes of carbonization. The slag discharger is discharged.
Combustible Gas Generation – after about 10 minutes of feeding, flammable gas is generated. First, it enters the cyclone dust removal system to clean the desulfurization and dust, then enters the condenser and is separated into wood vinegar and tar. The remaining gas is led to the outside of the main furnace by the induced draft fan. The main furnace is heated.
Reuse of Hot Flue Gas – part of the waste hot flue gas can be used to heat the dryer, and the remaining flue gas is discharged through the dust removal system (water cleaning, water spray, etc.).
Advantages of Wood Chips Charcoal Making Machine
1.This equipment adopts intelligent control system to save labor which achieves high efficiency/automation/intelligent development;
2. Settle the problem that traditional carbonization equipment cannot be continuously carbonized. Achieve new technologies for continuous feeding, carbonization and continuous carbon emissions;
3. The production process of carbon/gas/oil/fertilizer is realized, which solves the traditional high energy consumption/pollution/low efficiency defects;
4. Automatically collect tar/wood vinegar and combustible gas during carbonization to achieve efficient use of renewable energy.
Technical Data of The Wood Charcoal Making Machine
|Hourly Feeding Capacity||500kg||0.8-1 Tons||1.5-2Tons||2.5-3Tons|
|Raw Materials||1. All kinds of biomass waste, such as sawdust, Coconut shells, olive shells, palm shells, bamboo,etc.
2. Civil sludge, municipal sludge, industrial sludge,etc
|Pattern||Horizontal & Rotary|
|Heating Materials||Charcoal, Wood, diesel, Natural Gas, LPG, Biomass, etc.|
|Total Power||40 kw/h||55kw/h||60kw/h||72kw/h|
|Floor Area (L*W*H)||30m*15m*7m||35*15*7m||45*15*10m||50*15*10m|
|Operating Pressure||Constant Pressure|
|Cooling Method||Recycling Water Cooling|
|Life span||5-8 Years|
Usage & Benefits of the End Products:
|Charcoal||Daily life||● widely used as fuel in BBQ.|
|● used as fuel in other area.|
|Agriculture||● attach heavy metal, improve the quality of soil.|
|Industry||● can be reprocessed into activated carbon.|
|● used for construction bricks with clay.|
|● widely used as fuel in industries such as steel and iron factories, ceramics and so on.|
|Biogas||Daily life||● widely used as fuel.|
|Agriculture||● greenhouse agriculture heating|
|Industry||● can be used as fuel.|
|● can be used for drying.|
|● can be used for generator to get electricity.|