Beston’s new plastic pyrolysis plant in 2019 converts plastics, tires, rubber and garbage into fuel oil. New pyrolysis equipment can use the combustible gas produced in the production process to replace fuel, and save operating costs. Moreover, the oil output rate of the new equipment has increased by 5%. There is no black smoke in the production process, no odor, and it has truly achieved energy conservation and environmental protection, turning waste into treasure.
1. Input material: Waste tire/rubber, Oil Sludge
2. Output products: Fuel oil, carbon black, steel wire,gas
3. Capacity/batch: 6-24 tons.
4.Reactor plate thickness: 16mm
5.Rotary speed: 0.4-0.8 turn/min
6. Cooling system:water condensing system
7. Life Span:5-8years
Process of Plastic/Tyre Pyrolysis
1.Feed raw material into reactor by full-automatic feeding machine and make sure the door of feeding machine is closed.
2. Heat the reactor by using coal, charcoal, fuel gas, wood etc. as heating materials. The reactor will be slowly heated, and when the temperature reaches about 250℃, the oil gas will be formed.
3. The oil gas coming out from the reactor then goes to condensing system and becomes liquid oil. We adopt new-type condenser which can improve the oil yield efficiency and make the oil yield to the maximum.
4. The gas which can’t be liquefied under normal pressure will be designed to go back to combustion system through safety device. It can be recycled to heat the reactor as fuel, which will save energy for the whole working process.
5.The carbon black are discharged automatically while the waste materials are fed into reactor.
Technical Data of Waste Plastic Pyrolysis Plant
|Working Method||Batch||Semi-Continuous||Fully Continuous|
|Raw Materials||Waste Plastic, Tyre, Rubber, Oil Sludge|
|Pattern||Horizontal & Rotary|
|Heating Materials||Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.|
|Floor Area (L*W*H)||30*10*8m||30*10*8m||40*10*8m||45*25*10m|
|Operating Pressure||Normal Pressure||Constant Pressure|
|Cooling Method||Water Cooling|
|Life span||5-8 Years|
End Products and Application
|The serial number||Name||Use|
|1||Tyre oil||(1) Can directly to sell|
|(2) Can use our distillation equipment for gasoline and diesel|
|(3) Can be used as a fuel|
|2||Carbon black||(1) Can directly to sell|
|(2) Can use carbon black refining equipment to make fine carbon black|
|(3) Can use the carbon black particle granulation equipment|
|3||Scrap steel wire||(1) Can directly to sell|
|(2) Can use hydraulic baling press do produce piece of easy transportation and storage|
|4||Oil gas||(1) Can pass gas spray gun used as fuel|
|(2) Excess gas can be storage system storage|